T-MaxÒ Manager/Plus is a front desk control unit for the T-MaxÒ Series. It can be connected to up to 64 T-MaxÒ 3As to control up to 64 tanning beds in a single salon. The T-MaxÒ manger/Plus has 64 dual-colored lights showing bed status. If the light for a certain bed is green, the bed is ready for a new session. If the light is red, the bed needs to be cleaned. If the light is flashing red, there is less than two minutes left in the session. If the light is flashing green, the T-MaxÒ 3As is in the cool-down mode. If the light is off, that bed is not available. A 16 x 2 back lit LCD display shows the exact status of a given bed. A 16 key keypad allows for manual session control. The T-MaxÒ Manager/Plus can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-MaxÒ Manager/Plus manually.

Up to eight T-MaxÒ Manager/Plus's can be connected to a single salon. A PC can be connected to each T-MaxÒ Manager/Plus in the salon with two or more T-MaxÒ Manager/Plus's up to 128 beds can be controled in a salon.

T-MaxÒ Manager/Pro is a front desk control unit for the T-MaxÒ Series. It can be connected to up to 64 T-MaxÒ 3As to control up to 64 tanning beds in a single salon. The T-MaxÒ Manger/Pro has 64 dual-colored lights showing bed status. If the light for a certain bed is green, the bed is ready for a new session. If the light is red, the bed needs to be cleaned. If the light is flashing red, there is less than two minutes left in the session. If the light is flashing green, the T-MaxÒ 3As is in the cool-down mode. If the light is off, that bed is not available. A 16 x 2 easy to read Vacum Fluorescent Display (VFD) shows the exact status of a given bed. A 16 key keypad allows for manual session control. The T-MaxÒ Manager/Plus can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-MaxÒ Manager/Pro manually.

T-MaxÒ Manager is a front desk control unit for the T-MaxÒ Series. It can be connected to up to 64 T-MaxÒ 3As to control up to 64 tanning beds in a single salon. The The display consist of 8, two digital LEDs along the top of the T-MaxÒ Manager, with a Start/Stop and a Set button below each display. A vertical row of 8 LEDs along the left side indicates which bank of eight beds are being displayed. The T-MaxÒ Manager can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-MaxÒ Manage manually.

Up to eight T-MaxÒ Managers can be connected to a single salon. A PC can be connected to each T-MaxÒ Manager in the salon with two or more T-MaxÒ Manager up to 128 beds can be controled in a salon.

Includes Everything: 1, 50' tested modular cable with RJ-22 connectors on each end, 1, power supply, and 1 T-MaxÒ 3A User's Guide. The T-MaxÒ 3A can operate as a stand-alone timer. Up, Down and Start/Stop buttons allow for easy control of your tanning bed. Terminals that screw down provide an easy to install and inexpensive way to control a tanning bed from the front desk of your salon. Two T-MaxÒ 3As can be connected together for remote, single bed control. Simply place a T-MaxÒ 3A in the tanning room and place the second T-MaxÒ 3A at the front desk and connect them together using the modular cable provided. The T-MaxÒ 3A at the front desk controls the T-MaxÒ 3A in the tanning room. The customer in the tanning room will see their delay time and will be able to press the Start/Stop button to turn the tanning bed on or off, but will not be able to change session times. Session times are controlled by the T- MaxÒ 3A at the front desk. For larger salons, up to 128 beds can be connected to the T-MaxÒ Manager or T-MaxÒ Manager/Plus in a daisy chain. Simply purchase a T-MaxÒ Manager or T-MaxÒ Manager/Plus for the front desk and a T-MaxÒ 3A for each tanning bed in the salon. Use the modular cable provided to connect the series from room to room. You can also connect the T-MaxÒ Manager or T-MaxÒ Manager/Plus to a computer and use today's most popular software to control the beds in your salon.

The T-MaxÒ intercom system is the first digital timing system for the tanning industry with a built in intercom. It has all the same great features as the regular T-MaxÒ Series, but also has incorporated a fully functional digital intercom system built right into the timer. The T-MaxÒ Intercom is loaded with extra features. An Auto Shut- Off feature can have the T-MaxÒ System turn the tanning bed off automatically if you need to call a room that has a customer currrently tanning. No seperate intercom system can provide that feature! The T-MaxÒ Intercom has built in call waiting. If you are talking to another room and a second room calls you, the T-MaxÒ Manager/Pro will flash a yellow light letting you know which person is trying to call you. The timer in the room will flash dashes as long as they are on hold. When the first room is disconnected, the call on hold will automatically pick up and the stop flashing and stay on solid indicating that they are on line. The T-MaxÒ Intercom also has an Emergency call feature. If you have cusomters tanning and an emergency arises (for example a tornado), you can send a page that will cancel every session. You can then make an annoucement that will be heard in every room that has a T-MaxÒ 3A Intercom in it. There is an automated in room messaging feature that will make an announcement before the session starts when the timer is in delay or when a session ends. Using the computer's sound card, you can record a different message for every bed or play the same message for each bed in the salon. Use it for advertising specials or even sell adverting timer to local businesses.

* Registered Trademarks.